What Is a Lower Parts Kit? AR-15 LPK Explained
One Horse complete lower parts kit for AR-15 rifles in a red, white, and black branded pouch, proudly made in the USA for reliable performance.

What Is a Lower Parts Kit? AR-15 LPK Explained

One Horse AR-15 lower parts kit in its branded pouch

Build guide

One Horse · 5-minute read

What Is a Lower Parts Kit? AR-15 LPK Explained

What’s in an AR-15 lower parts kit, what the fire control group is, when to buy a kit less the fire control group, and what else a stripped lower needs.

Quick answer

An AR-15 lower parts kit (LPK) is the set of small parts that turns a stripped lower receiver into a working lower: the fire control group (trigger, hammer, disconnector, their springs and pins), the safety selector, bolt catch, magazine catch and release, trigger guard, pivot and takedown pins, and the springs and detents that hold them. It does not include the buffer tube, buffer or stock. One Horse sells a complete AR15 Lower Parts Kit (OH-LPK01) and a kit less the fire control group (OH-LPK02) for builders with their own trigger. The One Horse AR15 Lower Parts Kit also includes a pistol grip. Both ship to you; no FFL needed.

Published November 15, 2026 · By One Horse, Brownstown, Indiana

Key takeaways

  • LPK = the small parts. Trigger group, controls, pins, springs and detents. Our OH-LPK01 kit adds a pistol grip.
  • Less FCG means no trigger, hammer or disconnector. Buy it if you have your own trigger.
  • Not included: buffer tube, buffer, spring and stock. Those come in a buffer tube kit.
  • Same kit for 5.56 and .300 BLK. The lower doesn’t change with caliber.
  • Don’t want to build? A complete AR-15 lower comes with the kit installed.

The basics

What a lower parts kit does

A stripped lower is the serialized receiver only, with empty holes and pockets. The lower parts kit fills them: the fire control group makes the rifle fire, the safety selector blocks the trigger, the bolt catch holds the bolt open on an empty magazine, the magazine catch holds the magazine, and the pivot and takedown pins hold the upper to the lower. Springs and detents keep each part in place.

Every One Horse lower is a mil-spec, forged 7075-T6 low shelf lower, and the AR15 Lower Parts Kit is made to finish a mil-spec stripped lower. See both lowers on the AR-15 lowers page.

Side by side

One Horse lower parts kits compared

From the One Horse product pages. Prices are live in the store.

KitFire control groupWhat’s in itPick it if
AR15 Lower Parts Kit (OH-LPK01)IncludedThe fire control group, a pistol grip, plus the springs, detents, pins and controls to finish a mil-spec stripped lowerYou’re building a lower from scratch
Lower Parts Kit Less Fire Control Group (OH-LPK02)Not includedsafety selector (semi auto), safety detent and spring, bolt catch with roll pin, plunger and spring, magazine catch, magazine catch spring, steel magazine release button, trigger guard assembly with roll pin, buffer retainer pin and spring, takedown pin, pivot pin, and the takedown/pivot detents and springsYou already have the trigger you want
OH-SHYT Kit (OH-OS01)Springs and pins onlySpare hammer and trigger springs, hammer/trigger pins, disconnector spring, detents, springs and roll pinsYou want spares for the parts that fly across the room

Parts checklist

Lower parts kit checklist: every part and its job

PartWhat it does
Trigger, hammer, disconnector (+ springs, pins)The fire control group. Fires the rifle and resets for the next shot.
Safety selector, detent and springBlocks the trigger on safe.
Bolt catch, plunger, spring and roll pinHolds the bolt open on an empty magazine.
Magazine catch, spring and release buttonHolds the magazine in and drops it when you press the button.
Trigger guard and roll pinCovers the trigger.
Pistol grip (in the OH-LPK01 kit)Your firing-hand grip. It also holds the safety selector detent and spring in place.
Pivot pin, takedown pin, detents and springsHold the upper to the lower and let you open the rifle.
Buffer retainer and springKeeps the buffer in the tube when the rifle is open.

Finishing a stripped lower?

What else you need

Add the Carbine Buffer Tube Kit (buffer tube, carbine buffer, carbine spring, castle nut and end plate) and a buttstock. Running a short barrel, a suppressor or the Atrius FRS? Pick a heavier buffer: H2 buffer or H3 buffer (see the buffer weight chart). Want a rifle or pistol already set up for forced reset use? See Forced Reset Ready™. The full list is in our AR-15 parts list.

Questions

Lower parts kit FAQ

What is a lower parts kit?

A lower parts kit (LPK) is the set of small parts that turns a stripped AR-15 lower receiver into a working lower: the fire control group, safety selector, bolt catch, magazine catch and release, trigger guard, pivot and takedown pins, and the springs and detents that hold them in place.

What is in an AR-15 fire control group?

The fire control group is the trigger, hammer and disconnector, their springs and the hammer and trigger pins. It is the part of the lower parts kit that makes the rifle fire. Builders who already own a trigger buy a kit without it.

What is the difference between a lower parts kit and a lower parts kit less fire control group?

A complete kit includes the fire control group. A kit less fire control group (LPK less FCG) has every other small part, for builders who are putting in their own trigger. One Horse sells both: the AR15 Lower Parts Kit (OH-LPK01) and the Lower Parts Kit Less Fire Control Group (OH-LPK02).

Does the One Horse lower parts kit include a pistol grip?

Yes. The One Horse AR15 Lower Parts Kit (OH-LPK01) includes a pistol grip along with the fire control group, controls, pins, springs and detents. The buffer tube kit and stock are sold separately.

Does a lower parts kit include the buffer tube or stock?

No. The buffer tube, buffer, buffer spring, castle nut and end plate come in a buffer tube kit, such as the One Horse Carbine Buffer Tube Kit (OH-BT01). The stock is separate too.

Is a lower parts kit the same for 5.56 and 300 Blackout?

Yes. The lower doesn’t change with caliber; the upper does. One lower, one lower parts kit, and a 5.56/.223 or 300 Blackout upper.

Will a One Horse lower parts kit fit my lower?

The One Horse AR15 Lower Parts Kit is made to finish a mil-spec stripped AR-15 lower. Both One Horse lowers are mil-spec.

Do I need an FFL to buy a lower parts kit?

No. A lower parts kit is a part and ships to you. Only the lower receiver ships to your FFL dealer. Check your state and local law before you order.

Can I skip the parts kit and buy a complete lower?

Yes. The AR15 Complete Lower Receiver (OH-CL01) comes assembled with a mil-spec lower parts kit, single-stage trigger, two-position safety, mil-spec buffer tube, A2 grip and the One Horse M4 6-position stock. Compare it with the stripped lower on our AR-15 lowers page.

Does it ship free?

Orders of $399 or more ship free.

American Made · Family Owned · Veteran Owned

Finish your lower

Lower parts kits, buffer tube kits and spares, made in America and shipped to you.

Federal, state and local laws vary and change, and it is the buyer’s responsibility to follow them. Questions? Call 812-200-0305 or email customerservice@theonehorse.com.

Like this? Get the next one by email.News, new builds and deals from One Horse.

Join Our One Horse Waitlist We will inform you when your One Horse product is back in stock!